1 Gang Kinetic Switch


The Kinetic switches require no wiring or batteries which eliminates the need for installing back boxes, creating channels in walls and adjusting decor, thus speeding up the installation process and reducing labour time & costs. The switch can be installed anywhere in the home, including the bathroom due to its IP67 rating. It can also be installed on a variety of surfaces, including glass, marble, ceramic tiles, and other smooth surfaces. The switches can be screwed to the surface, or stuck on with the adhesive pads supplied. They can also be retro-fit onto existing back boxes as they are the same size as standard switches.


Dimming is also possible, by using the 12V/24Vdc Furniture Lighting Receiver with built in dimming facility. Simply holding down the switch activates the dimming process. 240V lighting can be dimmed also using the SY8989/NEW 240V receiver (product must be dimmable or contain a dimmable lamp).


A small amount of kinetic energy is generated by the action of the clicking of the switch, which is converted to an electrical signal and sent to the receiver. The amount of energy used is very low, so the switch adheres to strict requirements on low power consumption & helps the environment.

Requires SY8989/NEW, SY2416, SY8996 or SY8999

Stock Code: SY8990

File Type: